Make sure that the main power switch is on and that the boat batteries have enough voltage.

Make sure that you are within radio range (max. 10 meters) of the Start Panel location.

If the ignition is not activated by the remote system, press the center button to see if any LEDs light. If not, the battery may be discharged and must be replaced. (Battery Type: CR2032).

Make sure the main power switch is on and that the boat batteries have enough voltage.

Check that the gear lever is in neutral.

Check that the manual Kill Switch is correctly inserted if used. Make sure that you are within radio range (max. 10 meters) of the Start Panel location.

If the ignition is not activated by the remote, press the center button of the remoter to see if any LED´s light. If not, the remote battery may be discharged and must be replaced. See page 14 (Battery Type: CR2032).

Make sure that the main power switch is on and that the boat batteries have enough voltage.

Make sure you entered the correct PIN code. If the correct PIN code was entered, the green LED lights.

Check that the gear lever is in neutral.

Check that the manual Kill Switch is correctly inserted if used.

If your boat is equipped with several engines, each engine can be individually started / stopped. Please see chapter: "Start the engines individually" in the user manual for further instructions.

The key lock must be unlocked before the AUX functions (e.g. tilt, windlass) is to be used. Press and hold the right and left arrow keys for 2 seconds, then release the buttons to use the desired function.