PRODUCT INFORMATION
Kit designed for Yamaha single outboard engines with mechanical or digital (DBW) controls AND a separate ignition switch. Supplied with a Plug & Play wiring harness for easy installation, connecting directly to the existing wiring.
*A minor modification to the Yamaha ignition switch is required for the CoastKey system to operate correctly. Please refer to the installation instructions for details.
Important – Yamaha Y-COP / EKS: If your Yamaha outboard is equipped with Y-COP, CoastKey can be installed in parallel, but Y-COP must be set to “Enable”. If your boat is equipped with Yamaha EKS (Electronic Key Switch), EKS must be deactivated before installing CoastKey. CoastKey and EKS are not recommended for use together. EKS deactivation must be performed by an authorized Yamaha dealer.
**Please make sure your Yamaha control system matches the description above before ordering. If you are unsure which kit is right for your installation, please contact us.
COASTKEY BASIC is the basic version of CoastKey.
In addition to the Engine Control Box and Harness, it consists of a Start Panel which is mounted in clear view at the steering position. To “unlock” you simply enter a PIN code instead of using an ignition key. The obvious advantage of this solution is that you have keyless access to the boat, and if there are several people using the boat, everyone has the same access without having to have their own keys. It is easy to change the PIN code to restrict access, for example after loaning out the boat.
- Keyless start
- Start Panel
- Engine Box
- Plug&Play cable ( easy installation )
CoastKey is installed instead of, or in parallel with, the existing ignition key, and you can still use the existing kill-switch lanyard.
